Pipe Equipment Specialists Ltd

CABLE
A range of products aimed at the cable laying industry.

TOWING HEADS
Towing Heads, also known as pipe or duct pullers, are a quick, simple and effective method of attaching a directional drilling rig, winch wire, or some other pulling device, to a plastic pipe.

STANDARD TOWING HEAD
Our original and most popular Towing Head designed to work over a range of wall thicknesses for any particular pipe size. This can be supplied with or without a rear eye and with a flat plate in place of the nose cone.

MUD TIGHT TOWING HEAD
Designed to prevent drilling fluid ingress when directional drilling. It has an outer sleeve and works over a range of internal diameters.

PE TOWING HEAD
This towing head is fused onto the PE pipe string and features a strong sealed, but rotating eye bolt, thus ensuring a fully sealing towing head.

DUCTING TOWING HEAD
Specially designed for thin walled PE and PVC pipe such as used in pipe bursting and cable ducting. This model is normally supplied with an outer sleeve and rear eye.

SCREW IN TOWING HEAD
A reliable and maintenance free one piece towing head which screws into the internal bore of a plastic pipe or duct.

SWIVELS
A range of swivels that have been specially developed for use with various installation techniques. Their application includes Pipe Bursting, Slip Lining and Directional Drilling

BREAKAWAY CONNECTOR
Also know as a weak link or fuse, the Breakaway Connector is designed to prevent damage to cables and pipes resulting from excessive tensile loads.

To calculate the size and quantity of Pins required please view the Pin Selection PDF below.

TOWING SOCKS (Chinese Fingers)
Also known as cable grips or Chinese Fingers, they are used to pull or support cables and pipes. They work on the principle of the harder the pull, the tighter the grip.

PIPE CLEANERS
This includes Scrapers, Wire Brush Pigs and Rubber Pull Throughs for the removal of all deposits and liquids from metal and plastic pipes.

PROVING PIGS
Used to 'prove' the internal bore of a pipe or duct prior to the installation of a liner or cable.

CONTINUOUS FIBREGLASS RODS + ACCESSORIES
Also known as Cobras, these continuous flexible fibreglass rods are supplied in a metal frame and are available in a range of thicknesses and lengths. They are used to install draw ropes, cameras, cleaning equipment and winch wires etc.

NESHOT MOLING
This kit of parts is designed to enable the new pipe or duct to be used as the air supply line to a free flying mole, thereby avoiding any potential problems resulting from collapsed bores.

WINDOW CUTTER
This product has now been superseded by the Kent Precision Window Cutter Please Click the link below -

FLEXIBLE TRACER ROD
Consisting of a flexible rod with a tracable core mounted on a reel, this piece of equipment can easiliy locate plastic pipes, ducts and hoses in mains and services (live or dead).

MULTI PULLER
This product is designed to pull a number of smaller pipes or cables into a directionally drilled bore or into an existing pipe or duct.

TOWING SLINGS
Towing Slings are used, mainly in directional drilling, to install a number of pipes, ducts or cables at the same time.

PIPE END CAPS
Used to provide a temporary water and dirt seal at the end of a pipe. Useful for sealing road crossings laid prior to the main pipeline.

LINK SEALS
Used to provide an end seal between a product pipe or cable and a casing, sleeve or duct.